Wrench Set: September 2011

Discount Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Cone Point, 1/2"-13, 1/2" Length (Pack of 25) Reviews

By bugha |

Friday, September 30, 2011

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

The Black Oxide coating provides some lubricity to the product, meaning that there is less friction generated when using these products. The coating also provides a mild corrosion resistance, but should not be relied on in environments where corrosion resistance is a primary concern.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Good for permanent setting of parts, the sharp point of the Cone penetrates deep into the surface to lock in place.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Set Screws keep parts from turning relative to a shaft
Black Oxide coating helps reduce friction and provides mild corrosion resistance
Do not have an external head
Drive system is a hexagon-shaped hole
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Best Price : Check Now!!

Product by Small Parts

Best Buy Combination Wrench Metric 9 Piece Set Reviews

By bugha |

Thursday, September 29, 2011

Posted in Combination ,| Metric ,| Reviews ,| Wrench | 0 comments

Standard Combination Wrench Set.9 Pc Set Includes: 7, 8, 9, 10 ,11,12, 13, 14, 15mm.Industrial Combination Wrenches, Satin Chromed Finish I Beam with Polished End.Wide I-Beam for better Gripping.Narrow Wrench Heads for easier access.Satin Chromed Sure Grip Body.Made from 31CRV3 High Performance Steel Forgings.Precision Machined Open End For an Exact Fit.12 Point Exact fit Super Drive On Box End.Guaranteed Quality - Germany.

Best Price : Check Now!!

Product by Wiha

Best Price Alloy Steel Set Screw, Hex Socket Drive, Cup Point, M8-1.25, 10mm Length (Pack of 50) Reviews

By bugha |

Wednesday, September 28, 2011

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Set Screws keep parts from turning relative to a shaft
Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
Do not have an external head
Drive system is a hexagon-shaped hole
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Best Price : Check Now!!

Product by Small Parts

Best Price Crescent 5 Piece Locking Plier Set, CLP5SET Reviews

By bugha |

Tuesday, September 27, 2011

Posted in CLP5SET ,| Crescent ,| Locking ,| Reviews | 0 comments

CRESCENT CLP5SET 5-PC LOCKING PLIERS SET

5 piece set includes 5 inch, 7 inch and 10 inch curved jaw locking pliers plus 6 inch and 9 inch long nose locking pliers.
Versatile curved jaw design also features integral wire cutter.
Long nose design features a wire cutter that gets into hard-to-reach spots.
Compound action for powerful non-slip locking grip.
Nickel plated finish resists rust and corrosion.

Best Price : Check Now!!

Product by Cooper Hand Tools

Model : CLP5SET

Best Buy Nylon 6/6 Set Screw, Recessed Slotted Drive, #8-32, 1-1/2" Length (Pack of 100) Reviews

By bugha |

Sunday, September 25, 2011

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Set Screws keep parts from turning relative to a shaft
Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
Do not have an external head
Driven by a flat-bladed driver
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Best Price : Check Now!!

Product by Small Parts

Best Buy Nylon 6/6 Set Screw, Slotted Drive, Flat Point, #8-32, 1/2" Length (Pack of 100) Reviews

By bugha |

Saturday, September 24, 2011

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers. Flat Points are useful for minimizing marring and are good for making frequent adjustments.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Set Screws keep parts from turning relative to a shaft
Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
Do not have an external head
Driven by a flat-bladed driver
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Best Price : Check Now!!

Product by Small Parts

Best Price Nylon 6/6 Set Screw, Slotted Drive, 1/4"-20, 2" Length (Pack of 100) Reviews

By bugha |

Friday, September 23, 2011

Set Screws keep parts from turning relative to a shaft
Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
Do not have an external head
Driven by a flat-bladed driver
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Best Price : Check Now!!

Product by Small Parts

Best Buy Nylon 6/6 Set Screw, Recessed Slotted Drive, #6-32, 1-5/8" Length (Pack of 100) Reviews

By bugha |

Thursday, September 22, 2011

Set Screws keep parts from turning relative to a shaft
Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
Do not have an external head
Driven by a flat-bladed driver
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Best Price : Check Now!!

Product by Small Parts

Cheapest Bondhus 12137 Set of 13 Hex L-wrenches, Long Length, sizes .050-3/8-Inch, 12137 Reviews

By bugha |

Wednesday, September 21, 2011

Corrosion resistance. Sharper corners for extra grab.

Hex long arm L-wrench sizes .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, and 3/8"
Precision cut ends provide full engagement
Tools are Made in the USA with Bondhus proprietary Protanium® steel and are up to 20% stronger than competitor tools
ProGuard¿ Finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time
Lifetime warranty - we will replace it free of charge

Best Price : Check Now!!

Product by Bondhus

Model : 12137

Cheapest Stanley Proto J30000R 6 Piece Metric Open End Wrench Set, J30000R Reviews

By bugha |

Monday, September 19, 2011

Increased torque applied to fastener with fewer rounded edges. Unique arc design increases surface contact. Anti-Slip Design (ASD) wrench has a locking groove prevents slippage and knuckle injury.

Set Includes: 8x9mm; 10x11mm; 12x13mm; 14x15mm; 16x17mm; 18x19mm; and Tool Roll
Corrosion resistance and easy to clean surfaces.
15 degree angled heads allow wrench to be used in four different turning angles for greater access in tight work areas.
Double nickel strike for rust resistance and prolonged life.
Satin finish provides corrosion resistance and a slip resistant grip.

Best Price : Check Now!!

Product by Proto

Model : J30000R

Best Price Bondhus 13148 Set of 5 Balldriver T-handles, sizes 4-10mm, 13148 Reviews

By bugha |

Sunday, September 18, 2011

With cushion grip.

Angle entry up to 25 degrees on sizes 4, 5, 6, 8, and 10mm
Cushion grip T-handle is ergonomically shaped to reduce pressure points during continuous use
Tools are Made in the USA with Bondhus proprietary Protanium® steel and are up to 20% stronger than competitor tools
ProGuard Finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time
Lifetime warranty - we will replace it free of charge

Best Price : Check Now!!

Product by Bondhus

Model : 13148

Best Buy Zinc Plated Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 5/16"-18, 5/16" Length (Pack of 50) Reviews

By bugha |

Saturday, September 17, 2011

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials. Zinc Plating helps to prevent corrosion.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Set Screws keep parts from turning relative to a shaft
Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
Do not have an external head
Drive system is a hexagon-shaped hole
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Best Price : Check Now!!

Product by Small Parts

Best Price Nylon 6/6 Set Screw, Slotted Drive, 1/4"-20, 1-1/2" Length (Pack of 100) Reviews

By bugha |

Friday, September 16, 2011

Set Screws keep parts from turning relative to a shaft
Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
Do not have an external head
Driven by a flat-bladed driver
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Best Price : Check Now!!

Product by Small Parts

Cheapest Alloy Steel Set Screw, Hex Socket Drive, Cone Point, M8-1.25, 25mm Length (Pack of 50) Reviews

By bugha |

Thursday, September 15, 2011

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Good for permanent setting of parts, the sharp point of the Cone penetrates deep into the surface to lock in place.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Set Screws keep parts from turning relative to a shaft
Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
Do not have an external head
Drive system is a hexagon-shaped hole
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Best Price : Check Now!!

Product by Small Parts

Best Buy Zinc Plated Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 5/16"-18, 1/2" Length (Pack of 50) Reviews

By bugha |

Tuesday, September 13, 2011

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials. Zinc Plating helps to prevent corrosion.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Set Screws keep parts from turning relative to a shaft
Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
Do not have an external head
Drive system is a hexagon-shaped hole
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Best Price : Check Now!!

Product by Small Parts

Cheapest Alloy Steel Set Screw, Hex Socket Drive, Cone Point, M10-1.5, 40mm Length (Pack of 50) Reviews

By bugha |

Monday, September 12, 2011

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Good for permanent setting of parts, the sharp point of the Cone penetrates deep into the surface to lock in place.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Set Screws keep parts from turning relative to a shaft
Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
Do not have an external head
Drive system is a hexagon-shaped hole
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Best Price : Check Now!!

Product by Small Parts

Cheapest Westward 1EYD4 Combo Wrench Set, 12 Pt, Metric, 14 PC Reviews

By bugha |

Sunday, September 11, 2011

Combination Wrench Set, 15 Deg Offset, Number of Pieces 14, Metric, Number of Points 12, Wrenches Included 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 and 20mm, Range of Lengths 5 to 10 1/4 In, Vinyl Pouch, Black Finish, Meets/Exceeds ANSI

Best Price : Check Now!!

Product by WestWard Tools

Blog Archive